Monel 400
01Nickel-copper alloy with excellent seawater and chemical corrosion resistance.
- UNS
- N04400
- Best For
- Marine and chemical process service
Material · Monel
Monel
Piping Solutions.
Monel 400 & K-500 fittings, flanges and forged parts for marine and chemical service. UNS N04400/N05500 supply with MTCs and global shipping.
ISO 9001PEDEN 10204 3.1
Overview
Monel Manufacturer & Exporter
Nascent Fittings Inc. manufactures and supplies Monel fittings, flanges and custom alloy components for marine, chemical and high-corrosion duty. Products are produced to ASTM/ASME specifications with full material traceability and documentation.
Available Forms
Pipe FittingsFlangesForged FittingsCustomised BendsBars & Forgings
Monel
Precision-engineered for critical service
Specifications
Material Properties
Material Family
Nickel-Copper Alloy
Corrosion Resistance
Excellent
Oxidation Resistance
Excellent
Strength
High
Weldability
Excellent
Machinability
Moderate
Heat Resistance
Very Good
Cryogenic Service
Yes
Performance
Key Advantages
- Outstanding seawater corrosion resistance
- Excellent resistance to acids and alkalis
- High mechanical strength
- Good weldability and fabricability
- Long service life in marine environments
Use Cases
Industries & Applications
Marine & OffshoreShipbuildingChemical ProcessingOil & GasPump & Valve ComponentsDesalination
Why Nascent Fittings Inc.
- Precision manufacturing to international standards
- Complete material test certificates
- Custom sizes and fabrication support
- Global export capability
- Strict dimensional and material quality control
Grades
Available Grades
Specs shown for reference — confirm exact grade and standard with our technical team for your duty conditions.
Monel K500
02Precipitation-hardened Monel grade with higher strength and hardness.
- UNS
- N05500
- Best For
- High-strength marine and pump components
Product Range
Monel Products
17 product lines available in Monel
1/2" to 36"NB , ANSI/ASME B 16.9 · 10/20/40/80/100/120/160/XXS
1/2" to 80"NB · 10/20/40/80/100/120/160/XXS
1/2" to 80"NB , ANSI/ASME B 16.9 · 10/20/40/80/100/120/160/XXS
1/2" to 4"NB, · 10/20/40/80/100/120/160/XXS
Common diameters and cut lengths
1/2" to 80" NB, ANSI/ASME B 16.9, MSS-SP-43, MSS-SP-75, MSS-SP-97, MSS-SP-95 etc. · Sch 10/20/40/XS/60/80/100/120/140/160/XXS etc.
1/2" NB to 4" NB, (Socket Weld & Threaded)
1/2" to 80" NB. · Sch 10/20/40/XS/60/80/100/120/140/160/XXS etc.
Pipe Flanges Manufacturer & Exporter
1/4" NB
Long Radius Pipe Bends Manufacturer
1/2" to 80"NB · 10/20/40/80/100/120/160/XXS
1/2″ NB to 48″ NB (and project sizes) · Sch 5s, 10s, 20s, 40s, 80s, 160s, XXS / custom wall
1/2" to 80"NB · 10/20/40/80/100/120/160/XXS
Common imperial & metric tube OD ranges
OD and wall to ASTM / ASME / EN (instrument & heat-exchanger sizes)
1/2″ NB to 48″ NB (project dependent) · Sch 5s through XXS / custom
Compliance
Applicable Standards
Details are resolved from the shared standards catalog — scope, coverage and related properties for each specification.
ASTM B564
ASTMNickel alloy forgings.
- Scope
- Forged nickel alloy flanges, fittings and similar parts.
- Applies To
- Forged flanges and fittings in nickel alloys
ASTM B164
ASTMNickel-copper alloy rod, bar, and wire.
- Scope
- Monel and related Ni-Cu alloy bar products.
- Applies To
- Machined Monel fittings, fasteners and shafts
ASTM B366
ASTMFactory-made wrought nickel and nickel alloy fittings.
- Scope
- Wrought nickel-alloy buttweld and related fittings.
- Applies To
- Nickel, Monel, Inconel, Hastelloy and similar fittings
Documentation
Certificates & Inspection
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
Selection Guide
Comparison Insights
Performs Better Than
- Carbon steel in hydrofluoric acid and seawater service
- Many stainless grades in reducing acid environments
- Copper alloys where higher strength and toughness are required
Considerations
- Higher material cost than stainless and carbon steel
- Work-hardening can require controlled machining and forming
FAQ
Frequently Asked Questions
Need Monel components?
Share your specifications and our team will respond with grades, lead times and a tailored quote.