Nascent Fittings Inc.·Aluminium
Aluminium Radial Tee
Radial/pigging tees with flow-guiding design for pipeline systems. Available in CS, SS and alloys with custom sizing, MTCs and export support.
- Material
- Aluminium
- Standard
- ASTM 2000
- Corrosion
- Excellent
About
Aluminium Radial Tee
Product overview combined with Aluminium material context for project selection.
The Radial Tee has an inner sleeve that directs the pig through the main line past the branch. Perforated holes in the sleeve and annular cavity provide a flow area at least equal to the flow area of the branch line, permitting full product flow through the tee during normal operation.
To ensure their performance in most environments we are internally and externally fusion bonded epoxy coated to a minimum thickness of 250µm in either WRAS approved Blue (Potable water) or Red (Sewage). In addition in special circumstances alternative coatings may also available on request. we offer a comprehensive range of fittings in diameters with a number of jointing options.
Manufacturing note
We are a specialized fitting that facilitates passage of pipeline pigs past tee connections where flow bypass often leaves pigs stranded, without restricting product flow.
Typical applications
- Aerospace
- Marine
- Shipbuilding
- Automotive
- Power Generation
- Chemical Processing
Aluminium grades
Available grades for Radial Tee
Drawn from the Aluminium catalog and this product’s material specification.
2024
UNS A92024
High-strength aerospace aluminium alloy.
Best for · Aerospace applications
6061
UNS A96061
Versatile heat-treatable aluminium alloy with excellent corrosion resistance.
Best for · General engineering applications
6063
UNS A96063
Architectural grade aluminium with excellent finish quality.
Best for · Architectural and decorative applications
6101
UNS A96101
Aluminium alloy developed for electrical conductivity.
Best for · Electrical applications
7075
UNS A97075
One of the highest-strength aluminium alloys available.
Best for · High-strength applications
3003-H18
UNS A93003
Al-Mn alloy in hard temper (H18) with good corrosion resistance and moderate strength.
Best for · Formed sheet and tube applications
3003-H112
UNS A93003
Al-Mn alloy in H112 temper for wrought products with good corrosion resistance.
Best for · General wrought aluminium parts
6351-T5
UNS A96351
Al-Mg-Si extrusion alloy in T5 temper with good strength and corrosion resistance.
Best for · Structural extrusions
6351-T6
UNS A96351
Solution heat-treated and artificially aged 6351 with higher strength.
Best for · Higher-strength extrusions
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
6ASTM
ASTMASTM International material and product specifications.
- Scope
- Umbrella reference for ASTM material grades used across the catalog.
- Applies To
- Carbon, alloy, stainless, duplex and nickel-alloy piping products
ASTM A536
ASTMDuctile iron castings.
- Scope
- Chemical composition and mechanical property requirements for ductile iron castings.
- Applies To
- Cast components where ductile iron is specified
EN 545
ENDuctile iron pipes, fittings, accessories and their joints for water pipelines.
- Scope
- Requirements for ductile iron water pipeline components.
- Applies To
- Water distribution ductile iron pipes and fittings
EN 598
ENDuctile iron pipes, fittings, accessories and their joints for sewerage applications.
- Scope
- Ductile iron components for sewage and wastewater systems.
- Applies To
- Sewerage ductile iron pipes and fittings
ASTM B247
ASTMAluminum and aluminum-alloy die forgings, hand forgings, and rolled ring forgings.
- Scope
- Chemical and mechanical requirements for aluminium alloy forgings.
- Applies To
- Aluminium forged flanges, fittings and machined components
ASTM B361
ASTMFactory-made wrought aluminum and aluminum-alloy welding fittings.
- Scope
- Wrought aluminium fittings for welding assembly.
- Applies To
- Aluminium buttweld elbows, tees, reducers and caps
Certificates
4EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
Manufacturing
Crafted with care
Workshop and production views for Aluminium Radial Tee — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Radial Tee
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Radial Tee?+
Yes. Nascent Fittings Inc. manufactures and supplies Radial Tee for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Radial Tee worldwide?+
Yes. We export Radial Tee globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Radial Tee?+
Radial Tee is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Aluminium Radial Tee?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
