Nascent Fittings Inc.·Copper Alloy
Copper Alloy Radial Tee
Radial/pigging tees with flow-guiding design for pipeline systems. Available in CS, SS and alloys with custom sizing, MTCs and export support.
- Material
- Copper Alloy
- Standard
- ASTM 2000
- Corrosion
- Excellent
About
Copper Alloy Radial Tee
Product overview combined with Copper Alloy material context for project selection.
The Radial Tee has an inner sleeve that directs the pig through the main line past the branch. Perforated holes in the sleeve and annular cavity provide a flow area at least equal to the flow area of the branch line, permitting full product flow through the tee during normal operation.
To ensure their performance in most environments we are internally and externally fusion bonded epoxy coated to a minimum thickness of 250µm in either WRAS approved Blue (Potable water) or Red (Sewage). In addition in special circumstances alternative coatings may also available on request. we offer a comprehensive range of fittings in diameters with a number of jointing options.
Manufacturing note
We are a specialized fitting that facilitates passage of pipeline pigs past tee connections where flow bypass often leaves pigs stranded, without restricting product flow.
Typical applications
- Marine
- Shipbuilding
- Offshore Platforms
- Heat Exchangers
- Condensers
- Power Generation
Copper Alloy grades
Available grades for Radial Tee
Drawn from the Copper Alloy catalog and this product’s material specification.
UNS C70600 (Cu-Ni 90/10)
UNS C70600
Copper Nickel 90/10 alloy with excellent seawater corrosion resistance, biofouling resistance, and long service life.
Best for · General marine and seawater service
UNS C71500 (Cu-Ni 70/30)
UNS C71500
Copper Nickel 70/30 alloy with higher nickel content providing enhanced corrosion resistance and superior strength in aggressive seawater environments.
Best for · High-velocity seawater and offshore service
UNS C71640
UNS C71640
Enhanced Copper Nickel alloy developed for demanding marine and offshore applications requiring superior corrosion resistance and mechanical strength.
Best for · Critical offshore and seawater applications
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
8ASTM
ASTMASTM International material and product specifications.
- Scope
- Umbrella reference for ASTM material grades used across the catalog.
- Applies To
- Carbon, alloy, stainless, duplex and nickel-alloy piping products
ASTM A536
ASTMDuctile iron castings.
- Scope
- Chemical composition and mechanical property requirements for ductile iron castings.
- Applies To
- Cast components where ductile iron is specified
EN 545
ENDuctile iron pipes, fittings, accessories and their joints for water pipelines.
- Scope
- Requirements for ductile iron water pipeline components.
- Applies To
- Water distribution ductile iron pipes and fittings
EN 598
ENDuctile iron pipes, fittings, accessories and their joints for sewerage applications.
- Scope
- Ductile iron components for sewage and wastewater systems.
- Applies To
- Sewerage ductile iron pipes and fittings
ASTM / ASME SB61
ASTM / ASMESteam or valve bronze castings.
- Scope
- Composition and property requirements for bronze castings used under pressure.
- Applies To
- Valves, fittings and flanges in marine and industrial service
ASTM / ASME SB62
ASTM / ASMEComposition bronze or ounce metal castings.
- Scope
- Cast bronze for pressure-containing valves and fittings.
- Applies To
- Valves, fittings and flanges
ASTM B151
ASTMCopper-nickel-zinc alloy (nickel silver) and copper-nickel rod and bar.
- Scope
- Rod and bar products in copper-nickel alloys.
- Applies To
- Machined fittings, fasteners and bar stock components
ASTM B152
ASTMCopper sheet, strip, plate, and rolled bar.
- Scope
- Copper flat products for fabrication and cladding.
- Applies To
- Sheet/plate feed stock for fabricated copper components
Certificates
4EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
Manufacturing
Crafted with care
Workshop and production views for Copper Alloy Radial Tee — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Radial Tee
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Radial Tee?+
Yes. Nascent Fittings Inc. manufactures and supplies Radial Tee for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Radial Tee worldwide?+
Yes. We export Radial Tee globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Radial Tee?+
Radial Tee is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Copper Alloy Radial Tee?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
