Nascent Fittings Inc.·Copper
Copper Reducers
Concentric & eccentric pipe reducers to ASME B16.9 in SS, CS, alloy & duplex. Sch 10–XXS, custom reductions, MTCs and global export packing.
- Material
- Copper
- Size
- 1/2"NB
- Grades
- C11000 (ETP), C12200 (DHP)
- Corrosion
- Very Good
About
Copper Reducers
Product overview combined with Copper material context for project selection.
A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer: concentric and eccentric reducers.
Butt welding reducers are produced by pressing. The semi-finished product is rolled seamless tubes. Reducers are mainly used as part of pipelines in the construction, energy engineering and mining industry. Dimensions of tube reducers are: outside diameter of 26.9 -114, 3 mm, wall thickness from 2.3 to 3.6 mm, NPS 3/4 - 4.
Manufacturing note
Nascent Fittings Inc offers the international quality pipe reducers made up of steel and other alloys. Steel Pipe Reducers available are of concentric and eccentric types. The pipe reducers are suitable components in pipelines that reduce pipe size from large to small bores. The inlet and outlet ends of the steel pipe reducers and alloy pipe reducers align to a common center line.
Typical applications
- HVAC Systems
- Plumbing
- Electrical
- Heat Exchangers
- Industrial Utilities
- Power Generation
Copper grades
Available grades for Reducers
Drawn from the Copper catalog and this product’s material specification.
C11000 (ETP)
UNS C11000
Electrolytic tough pitch copper with high electrical conductivity.
Best for · Electrical and general industrial use
C12200 (DHP)
UNS C12200
Deoxidized high phosphorus copper for welding and brazing.
Best for · Plumbing and heat transfer
Also available in
Other materials for this product
View Reducers in another material grade family.
Scroll →
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
6ASME B16.9
ASMEFactory-made wrought buttwelding fittings.
- Scope
- Dimensions, tolerances, ratings, and markings for wrought buttweld fittings.
- Applies To
- Elbows, tees, reducers, caps, crosses, stub ends and related forms
- Size Coverage
- Typically NPS ½ through 48
- Related
- MSS SP-43, ASME B16.28
ASME B16.28
ASMEWrought steel buttwelding short radius elbows and returns.
- Scope
- Dimensions and marking for short-radius elbows and 180° returns.
- Applies To
- Short radius elbows and return bends
- Related
- ASME B16.9
MSS SP-43
MSSWrought and fabricated butt-welding fittings for low pressure, corrosion resistant applications.
- Scope
- Dimensions for stainless and alloy butt-weld fittings intended for low-pressure service.
- Applies To
- Buttweld fittings in corrosion-resistant alloys
- Related
- ASME B16.9
ASTM B88
ASTMSeamless copper water tube.
- Scope
- Copper water tube Types K, L and M.
- Applies To
- Potable water and related copper tube systems
ASTM B75
ASTMSeamless copper tube.
- Scope
- General-purpose seamless copper tube requirements.
- Applies To
- Copper tube for plumbing and industrial use
ASTM B280
ASTMSeamless copper tube for air conditioning and refrigeration field service.
- Scope
- Soft annealed seamless copper tube for ACR service.
- Applies To
- ACR tubing and related copper tube products
Certificates
2ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
Manufacturing
Crafted with care
Workshop and production views for Copper Reducers — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Reducers
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Reducers?+
Yes. Nascent Fittings Inc. manufactures and supplies Reducers for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Reducers worldwide?+
Yes. We export Reducers globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Reducers?+
Reducers is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Copper Reducers?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
