Nascent Fittings Inc.·Cupro Nickel
Cupro Nickel Spades & Spacer
Spectacle blinds, spades and spacers for line isolation in SS, CS & alloys. ASME B16.48 styles with MTCs, custom face finish and export supply.
- Material
- Cupro Nickel
- Size
- 15mm- 1500mm (1/2"- 60")
- Standard
- ASME B16.5
- Corrosion
- Excellent
About
Cupro Nickel Spades & Spacer
Product overview combined with Cupro Nickel material context for project selection.
To change it from open to closed, only half the bolts need to be removed and the Spade or Spacer is swapped over. The removed bolts are then installed and tightened. The handle protrudes from the pipe and provides an indicator of whether a Spade or Spacer is installed.
Spade and Spacer are basically the same as Spectacle Blinds, except that they both are not attached to each other. Spades and Spacers be used in systems where the maintenance is not often necessary, or it is also used in applications with large pipe sizes. Depending on the flange sizes and the Pressure Classes, Spades can weigh hundreds of pounds.
Manufacturing note
Spade and Spacers are part of a family referred to as Line Blinds. Jointly they perform the same function as a Spectacle Blind as essentially a simplistic valve. The Spade or Spacer is fitted in the line between two flanges and is bolted in place. The Spacer is used when the line is required open and the Paddle Blind or Spade is installed when the line is required blocked or closed.
Typical applications
- Marine & Offshore
- Shipbuilding
- Desalination
- Seawater Cooling
- Power Generation
- Oil & Gas
Cupro Nickel grades
Available grades for Spades & Spacer
Drawn from the Cupro Nickel catalog and this product’s material specification.
Cu-Ni 90/10 (C70600)
UNS C70600
90/10 copper-nickel for seawater corrosion resistance.
Best for · Marine cooling and condenser service
Cu-Ni 70/30 (C71500)
UNS C71500
70/30 copper-nickel for more aggressive seawater service.
Best for · Desalination and offshore piping
C71640
UNS C71640
Copper-nickel-iron-manganese alloy with enhanced resistance in high-velocity seawater.
Best for · High-velocity seawater systems
Also available in
Other materials for this product
View Spades & Spacer in another material grade family.
Scroll →
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
4ASME B16.5
ASMEPipe flanges and flanged fittings through NPS 24.
- Scope
- Pressure-temperature ratings, materials, dimensions, tolerances, marking and testing for pipe flanges and flanged fittings.
- Applies To
- Weld neck, slip-on, blind, socket weld, threaded, lap joint and reducing flanges
- Size Coverage
- NPS ½ through 24
- Class Range
- Class 150 to 2500
ASTM B466
ASTMSeamless copper-nickel pipe and tube.
- Scope
- Seamless Cu-Ni pipe and tube for marine and industrial service.
- Typical Grades
- C70600 (90/10), C71500 (70/30)
ASTM B467
ASTMWelded copper-nickel pipe.
- Scope
- Welded Cu-Ni pipe for seawater and process systems.
- Typical Grades
- C70600, C71500
ASTM B151
ASTMCopper-nickel-zinc alloy (nickel silver) and copper-nickel rod and bar.
- Scope
- Rod and bar products in copper-nickel alloys.
- Applies To
- Machined fittings, fasteners and bar stock components
Certificates
3ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
Manufacturing
Crafted with care
Workshop and production views for Cupro Nickel Spades & Spacer — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Spades & Spacer
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Spades & Spacer?+
Yes. Nascent Fittings Inc. manufactures and supplies Spades & Spacer for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Spades & Spacer worldwide?+
Yes. We export Spades & Spacer globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Spades & Spacer?+
Spades & Spacer is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Cupro Nickel Spades & Spacer?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
