Nascent Fittings Inc.·Alloy Steel
Alloy Steel Spades & Spacer
Spectacle blinds, spades and spacers for line isolation in SS, CS & alloys. ASME B16.48 styles with MTCs, custom face finish and export supply.
- Material
- Alloy Steel
- Size
- 15mm- 1500mm (1/2"- 60")
- Standard
- ASME B16.5
- Corrosion
- Moderate
About
Alloy Steel Spades & Spacer
Product overview combined with Alloy Steel material context for project selection.
To change it from open to closed, only half the bolts need to be removed and the Spade or Spacer is swapped over. The removed bolts are then installed and tightened. The handle protrudes from the pipe and provides an indicator of whether a Spade or Spacer is installed.
Spade and Spacer are basically the same as Spectacle Blinds, except that they both are not attached to each other. Spades and Spacers be used in systems where the maintenance is not often necessary, or it is also used in applications with large pipe sizes. Depending on the flange sizes and the Pressure Classes, Spades can weigh hundreds of pounds.
Manufacturing note
Spade and Spacers are part of a family referred to as Line Blinds. Jointly they perform the same function as a Spectacle Blind as essentially a simplistic valve. The Spade or Spacer is fitted in the line between two flanges and is bolted in place. The Spacer is used when the line is required open and the Paddle Blind or Spade is installed when the line is required blocked or closed.
Typical applications
- Power Generation
- Thermal Power Plants
- Refineries
- Petrochemical Plants
- Oil & Gas
- Pressure Vessels
Alloy Steel grades
Available grades for Spades & Spacer
Drawn from the Alloy Steel catalog and this product’s material specification.
F1
Low alloy steel with improved temperature resistance.
Best for · Moderate temperature service
F5
5% chromium alloy steel with improved oxidation resistance.
Best for · High temperature applications
F9
9% chromium alloy steel with superior heat resistance.
Best for · Elevated temperature service
F11
Chrome moly alloy steel offering excellent creep resistance.
Best for · High-pressure steam service
F22
2.25% chromium and 1% molybdenum alloy steel.
Best for · High temperature pressure systems
F91
Premium 9Cr-1Mo-V alloy steel with exceptional creep resistance.
Best for · Ultra-supercritical power plants
WP12 / F12
1.25Cr-0.5Mo alloy steel buttweld grade related to ASTM A234 WP12 / A182 F12 for elevated temperature service.
Best for · Chrome-moly buttweld fittings
Also available in
Other materials for this product
View Spades & Spacer in another material grade family.
Scroll →
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
3ASME B16.5
ASMEPipe flanges and flanged fittings through NPS 24.
- Scope
- Pressure-temperature ratings, materials, dimensions, tolerances, marking and testing for pipe flanges and flanged fittings.
- Applies To
- Weld neck, slip-on, blind, socket weld, threaded, lap joint and reducing flanges
- Size Coverage
- NPS ½ through 24
- Class Range
- Class 150 to 2500
ASTM A182
ASTMForged or rolled alloy and stainless steel pipe flanges, fittings, valves and parts.
- Scope
- Forged and rolled stainless, alloy and duplex steel components for high-temperature service.
- Applies To
- Flanges, fittings, valves and pressure parts
- Typical Grades
- F304/L, F316/L, F11, F22, F91, F51/F60 and related
ASME SA182
ASMEASME equivalent of ASTM A182 for forged stainless and alloy components.
- Scope
- Boiler and pressure vessel code adoption of ASTM A182 material requirements.
- Related
- ASTM A182
Certificates
5EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
NACE MR0175
Materials for use in H₂S-containing environments in oil and gas production.
- Type
- Service / sour-service requirement
- Scope
- Limits hardness, microstructure and material selection for sulfide stress cracking resistance.
- Applies To
- Carbon, alloy and CRA piping products ordered for sour service
- Benefit
- Supports upstream oil & gas projects specifying sour-service compliance.
Manufacturing
Crafted with care
Workshop and production views for Alloy Steel Spades & Spacer — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Spades & Spacer
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Spades & Spacer?+
Yes. Nascent Fittings Inc. manufactures and supplies Spades & Spacer for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Spades & Spacer worldwide?+
Yes. We export Spades & Spacer globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Spades & Spacer?+
Spades & Spacer is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Alloy Steel Spades & Spacer?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
