Nascent Fittings Inc.·Carbon Steel
Carbon Steel Dish Ends
Torispherical, elliptical & hemispherical dish ends in CS, SS and alloy steel. Pressure-vessel heads with MTCs, custom diameters and export supply.
- Material
- Carbon Steel
- Corrosion
- Moderate
About
Carbon Steel Dish Ends
Product overview combined with Carbon Steel material context for project selection.
Customers can avail from us optimum quality Dish End, which is made available in different sizes and specifications. These dish ends are sturdily constructed using tested carbon & stainless steel and advanced methodology. TQM policies are strictly followed while fabricating these dish ends. Material used in the fabrication process of these dish ends is procured only from reputed vendors of the market. Prior to delivery, these fabricated products are duly checked.
We manufacture all major types of dish ends including 2:1 Elliptical, 10% Torispherical, 6% Torispherical, Hemispherical, Dished Only and Reversed Dish Ends, etc. We can supply these vessel heads in single piece design, two piece and multi joint flower pattern fabrication, depending upon the availability of plate sizes. The price range of these dished ends has been set reasonably for our clients.
Manufacturing note
We manufacture and supply dished ends in various materials. Dished end (also called tank ends, vessel end) is the end caps on a cylindrical shaped pressure vessel which is made with carbon steel, stainless steel and other alloy steel. The Pressure Vessel Head is cold processed or hot-formed, seamless and stress treated, these tank ends are widely used in industrial storage or pressure vessels such as storage tanks, heat exchangers, towers, reactors, boilers and separations equipment.
Typical applications
- Oil & Gas
- Petrochemical
- Chemical Processing
- Power Generation
- Refineries
- Pressure Vessels
Carbon Steel grades
Available grades for Dish Ends
Drawn from the Carbon Steel catalog and this product’s material specification.
ASTM A105
Standard carbon steel forging grade for ambient and higher temperature service.
Best for · General piping applications
F42
High-strength carbon steel for pipeline systems.
Best for · Pipeline transmission systems
F46
Carbon steel grade for pressure transmission service.
Best for · Pipeline applications
F52
Medium-high strength carbon steel grade.
Best for · High-pressure piping
F56
Enhanced strength carbon steel grade.
Best for · Transmission pipelines
F60
High-strength carbon steel for critical pressure systems.
Best for · Pressure transmission systems
F65
Premium carbon steel grade for high-performance piping systems.
Best for · Critical pipeline infrastructure
F70
Highest strength ASTM A694 carbon steel grade.
Best for · Long-distance transmission pipelines
ASTM A234 WPB
Standard carbon steel buttweld fitting grade for moderate and elevated temperature service.
Best for · General buttweld piping
P235TR2
EN carbon steel grade for welded tubes for pressure purposes with specified elevated temperature properties.
Best for · Pressure tubing
P265TR2
Higher-strength EN carbon steel for welded pressure tubes.
Best for · Higher pressure tube service
P235GH
EN non-alloy steel for elevated temperature pressure vessels and pipe.
Best for · Elevated temperature pressure service
Also available in
Other materials for this product
View Dish Ends in another material grade family.
Scroll →
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
2ASTM A105
ASTMCarbon steel forgings for piping applications.
- Scope
- Forged carbon steel piping components for ambient and higher-temperature service.
- Applies To
- Flanges, fittings, valves and similar parts
- Typical Grades
- A105 / A105N
ASTM A694
ASTMCarbon and alloy steel forgings for pipe flanges, fittings, valves and parts for high-pressure transmission service.
- Scope
- High-strength carbon steel forgings for pipeline transmission flanges and fittings.
- Applies To
- Flanges and forged fittings for high-pressure gas/oil transmission
Certificates
5EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
NACE MR0175
Materials for use in H₂S-containing environments in oil and gas production.
- Type
- Service / sour-service requirement
- Scope
- Limits hardness, microstructure and material selection for sulfide stress cracking resistance.
- Applies To
- Carbon, alloy and CRA piping products ordered for sour service
- Benefit
- Supports upstream oil & gas projects specifying sour-service compliance.
Manufacturing
Crafted with care
Workshop and production views for Carbon Steel Dish Ends — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Dish Ends
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Dish Ends?+
Yes. Nascent Fittings Inc. manufactures and supplies Dish Ends for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Dish Ends worldwide?+
Yes. We export Dish Ends globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Dish Ends?+
Dish Ends is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Carbon Steel Dish Ends?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
