Nascent Fittings Inc.·Copper
Copper WELDOLET
Weldolet, sockolet, threadolet & other branch outlets in SS, CS, alloy & nickel. MSS-SP fittings with MTCs and global industrial export support.
- Material
- Copper
- Size
- 1/8 NB
- Grades
- C11000 (ETP), C12200 (DHP)
- Corrosion
- Very Good
About
Copper Outlets
Product overview combined with Copper material context for project selection.
Forging of Alloy Steel Nipple Outlet Fittings also provides means for aligning the grain flow to best obtain desired directional strengths. Secondary processing in Alloy Steel Sweepolet Fittings, such as heat treating, can be used to further refine the part. Finally, consideration must be given to the corrosive agents by means of which are why Alloy Steel Latrolet Fittings will come into contact.
Outlet Fittings has excellent weldability in dense plates and excellent low temp durability. Our products are made from superior quality Raw Material and are available in Customized Designs to suit different requirements of the clients. Our contemporary technology and constant efforts to acquire new skills to enhance production is the secret of our success and impeccable quality.
Manufacturing note
Weldolets are the most popular type of branch fittings and are available in a wide range of dimensions. A Weldolet has beveled ends at both ends and is, therefore, welded onto the run pipe on one side and onto the branch pipe on the other side. The shape of the Weldolet ensures little stress concentration on the branched pipe, by providing an integral reinforcement. Weldolet is the most common type among all the branch connections and is welded onto the outlet pipe. The weldolet or welding outlet is the most popularly and usually used branch connection fitting. The architecture of the weldolet minimizes the concentration of tension and provides overall strengthening. It has a beveled end and is attached by butt welding to the branch shaft, so it is part of butt weld fittings. The ends are bevelled to facilitate this process, and therefore the weldolet is considered a butt-weld fitting. Weldolet are designed to minimize stress concentrations and provide integral reinforcement. Due to Nascent’s extensive experience and expertise, modern manufacturing facilities enable Nascent to manufacture high-quality welding outlets in a variety of sizes, shapes, standards, and dimensions. Nascent fittings is a Manufacturer of a diverse range of industrial products that are well suited for use in a wide range of commercial and industrial settings. Nascent values its clients, which is why it provides a wide range of products in a variety of materials and grades at competitive prices.
Typical applications
- HVAC Systems
- Plumbing
- Electrical
- Heat Exchangers
- Industrial Utilities
- Power Generation
Configurations
Copper Outlets types
Open a type for drawings-aligned specifications.
Copper grades
Available grades for Outlets
Drawn from the Copper catalog and this product’s material specification.
C11000 (ETP)
UNS C11000
Electrolytic tough pitch copper with high electrical conductivity.
Best for · Electrical and general industrial use
C12200 (DHP)
UNS C12200
Deoxidized high phosphorus copper for welding and brazing.
Best for · Plumbing and heat transfer
Also available in
Other materials for this product
View Outlets in another material grade family.
Scroll →
Compliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
3ASTM B88
ASTMSeamless copper water tube.
- Scope
- Copper water tube Types K, L and M.
- Applies To
- Potable water and related copper tube systems
ASTM B75
ASTMSeamless copper tube.
- Scope
- General-purpose seamless copper tube requirements.
- Applies To
- Copper tube for plumbing and industrial use
ASTM B280
ASTMSeamless copper tube for air conditioning and refrigeration field service.
- Scope
- Soft annealed seamless copper tube for ACR service.
- Applies To
- ACR tubing and related copper tube products
Certificates
2ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
Manufacturing
Crafted with care
Workshop and production views for Copper WELDOLET — the same craftsmanship photos from our plant archives, shown in webp.
3 photos
People also ask
Questions about Outlets
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Outlets?+
Yes. Nascent Fittings Inc. manufactures and supplies Outlets for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Outlets worldwide?+
Yes. We export Outlets globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Outlets?+
Outlets is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Copper WELDOLET?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
