Nascent Fittings Inc.·Duplex Steel
Duplex Steel OD PLUG
Instrumentation & process tube fittings in SS and alloys. Compression elbows, tees & unions with MTCs and worldwide project supply.
- Material
- Duplex Steel
- Size
- Common tube OD ranges
- Standard
- ASME B31.3
- Corrosion
- Excellent
About
Duplex Steel Tube Fittings
Product overview combined with Duplex Steel material context for project selection.
Tube fittings for instrumentation, hydraulic and process tubing connections. Nascent supplies compression, bite-type and related tube fittings in stainless steel and compatible alloys for leak-tight joints under vibration and pressure cycling.
Available in elbows, tees, unions, connectors and adapters sized to common tube OD standards, with material certificates for oil & gas, chemical and utility systems.
Manufacturing note
Nascent fittings is a recognized manufacturer and supplier of Fitting End Closure, which are not designed for service in wet corrosive environments. The Fitting End Closure is the low carbon version of the alloy, and is operated for ease of fabrication. Super Duplex Steel Fitting End Closure are prone to intergranular corrosion after long term exposure at high temperatures. Tube Plugs (Fitting End Closures) are available in a variety of sizes and shapes with a variety of components. However, due to its high chromium content, these Fitting End Closure is more corrosion resistant than most heat resistant alloys. Monel Alloy Fitting End Closure has a carbon content restricted to exclude the lower end, so is the grade of choice for high temperature applications. The high chromium content of Hastelloy Alloy Fitting End Closure intends to increase high temperature properties and gives good aqueous corrosion resistance. Nascent fittings are equipped with cutting-edge technology and an expert workforce to ensure that work is enhanced.
Typical applications
- Oil & Gas
- Petrochemical
- Chemical Processing
- Power Generation
- Marine
- Desalination
Configurations
Duplex Steel Tube Fittings types
Open a type for drawings-aligned specifications.
Duplex Steel AIR HEADER MANIFOLDS
Duplex Steel BALL VALVE
Duplex Steel BRANCH TEE
Duplex Steel BULK HEAD UNION
Duplex Steel CHECK VALVE
Duplex Steel CONDENSATE POT
Duplex Steel FEMALE CONNECTOR
Duplex Steel FEMALE TEE
Duplex Steel HOSE CONNECTIONS
Duplex Steel MALE CONNECTOR
Duplex Steel MANIFOLDS VALVE
Duplex Steel NEEDLE VALVE
Duplex Steel OD CAP
Duplex Steel OD PLUG
Duplex Steel REDUCING UNION
Duplex Steel RUN TEE
Material scope
Duplex Steel specification
Dimensional and grade range typically supplied for OD PLUG in this material.
- Grade
- ASTM/ASME A/SA A105, LF2
- Grade
- ASTM/ASME A/SA F11, F22, F91 F12, F5, F9,
- Grade
- ASTM/ASME A/SA-182, 310, 321, 317L, 347, 309, 409, 410, 420, 430, 440, 904L, F304/304L/304H, 316/316L/316H/316Ti etc.
- Grade
- Duplex steel: UNS S32205, S31803
- Grade
- Super Duplex Steel: UNS S32750, S32760
Duplex Steel grades
Available grades for Tube Fittings
Drawn from the Duplex Steel catalog and this product’s material specification.
F44
UNS S31254
High alloy duplex stainless steel.
F45
UNS S31803
Duplex stainless steel with excellent corrosion resistance.
F51
UNS S31803
Most common duplex grade.
F60
UNS S32205
High strength duplex steel.
F61
UNS S32550
Premium duplex steel for aggressive service.
UNS S31803
UNS S31803
Standard duplex stainless (22Cr) commonly supplied to ASTM A815 / A182 F51.
Best for · General duplex piping
UNS S32205
UNS S32205
Modern dual-certified duplex chemistry aligned with F60 / 2205 practice.
Best for · High-strength duplex service
UNS S32750
UNS S32750
Super duplex 25Cr grade for severe chloride and high-strength applications.
Best for · Super duplex chloride resistance
UNS S32760
UNS S32760
Super duplex with tungsten additions for aggressive seawater and process media.
Best for · Aggressive seawater and process fluids
Also available in
Other materials for this product
View Tube Fittings in another material grade family.
Scroll →
Material
Aluminium
Tube Fittings
View
Material
Stainless Steel
Tube Fittings
View
Material
Alloy Steel
Tube Fittings
View
Material
Titanium
Tube Fittings
View
Material
Carbon Steel
Tube Fittings
View
Material
Monel
Tube Fittings
View
Material
Hastelloy
Tube Fittings
View
Material
Copper
Tube Fittings
View
Material
Low Temperature Carbon Steel
Tube Fittings
View
Material
Nickel Alloy
Tube Fittings
View
Material
Copper Alloy
Tube Fittings
View
Material
Cupro Nickel
Tube Fittings
ViewCompliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
3ASME B31.3
ASMEProcess piping design code.
- Scope
- Design, materials, fabrication, assembly, erection, examination, inspection and testing of process piping.
- Applies To
- Petroleum, chemical, pharmaceutical, textile, paper, semiconductor and related process plants
ASTM A182
ASTMForged or rolled alloy and stainless steel pipe flanges, fittings, valves and parts.
- Scope
- Forged and rolled stainless, alloy and duplex steel components for high-temperature service.
- Applies To
- Flanges, fittings, valves and pressure parts
- Typical Grades
- F304/L, F316/L, F11, F22, F91, F51/F60 and related
ASME SA182
ASMEASME equivalent of ASTM A182 for forged stainless and alloy components.
- Scope
- Boiler and pressure vessel code adoption of ASTM A182 material requirements.
- Related
- ASTM A182
Certificates
5EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
NACE MR0175
Materials for use in H₂S-containing environments in oil and gas production.
- Type
- Service / sour-service requirement
- Scope
- Limits hardness, microstructure and material selection for sulfide stress cracking resistance.
- Applies To
- Carbon, alloy and CRA piping products ordered for sour service
- Benefit
- Supports upstream oil & gas projects specifying sour-service compliance.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
People also ask
Questions about Tube Fittings
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Tube Fittings?+
Yes. Nascent Fittings Inc. manufactures and supplies Tube Fittings for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Tube Fittings worldwide?+
Yes. We export Tube Fittings globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Tube Fittings?+
Tube Fittings is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Duplex Steel OD PLUG?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
