Nascent Fittings Inc.·Low Temperature Carbon Steel
Low Temperature Carbon Steel Reducing Tee
ASME B16.9 buttweld elbows, tees, reducers & caps in SS, CS, alloy, duplex & nickel alloys. Sch 10–XXS, MTCs, inspection support and worldwide export supply.
- Material
- Low Temperature Carbon Steel
- Size
- 1/2" to 80" NB
- Schedule
- Sch 10/20/40/XS/60/80/100/120/140/160/XXS
- Grades
- ASTM A420 WPL6
About
Low Temperature Carbon Steel Buttweld Fittings
Product overview combined with Low Temperature Carbon Steel material context for project selection.
Nascent fittings is a reputed manufacturer and exporter of a wide range of Buttweld fittings which are used in industrial pipe systems to change direction, branching and to mechanically connect equipments to the system including high temperature conditions like furnace.
Manufacturing note
The primary purpose of a Tee is to make a 90° branch from the main run of the pipe. Standard there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee (or straight tee) is used as the branch has the same diameter as the run-pipe. The reducing tee (or Unequal Tee) is used as the branch has a smaller diameter as the run-pipe. The Buttweld reducing Tee fitting has a branch port that is smaller than the pipe run. The equal Tee is needed where the branch has the same diameter as the pipe, but when the branch has a smaller diameter than the run pipe, a reducing Tee is required. Furthermore, it can also consider the effect size reduction from one of the run ports to the other.
Typical applications
- LNG Plants
- Cryogenic Storage
- Natural Gas Processing
- Petrochemical
- Chemical Processing
- Power Generation
Configurations
Low Temperature Carbon Steel Buttweld Fittings types
Open a type for drawings-aligned specifications.
Low Temperature Carbon Steel 180° Elbow
Low Temperature Carbon Steel 45° Elbow
Low Temperature Carbon Steel 90° Elbow
Low Temperature Carbon Steel Barred Nipples
Low Temperature Carbon Steel Barred Tee
Low Temperature Carbon Steel Cross Tee
Low Temperature Carbon Steel End Cap
Low Temperature Carbon Steel Equal Tee
Low Temperature Carbon Steel Laterals
Low Temperature Carbon Steel Long Stubend
Low Temperature Carbon Steel Reducer
Low Temperature Carbon Steel Reducing Tee
Low Temperature Carbon Steel Short Stubend
Low Temperature Carbon Steel Swage Nipples
Low Temperature Carbon Steel U Bend
Material scope
Low Temperature Carbon Steel specification
Dimensional and grade range typically supplied for Reducing Tee in this material.
- Grade
- Low Temp. CS: ASTM A-420 WPL6
Low Temperature Carbon Steel grades
Available grades for Buttweld Fittings
Drawn from the Low Temperature Carbon Steel catalog and this product’s material specification.
ASTM A420 WPL6
Low-temperature carbon steel buttweld fitting grade with proven toughness for cryogenic and refrigerated service.
Best for · Low-temperature buttweld fittings
Also available in
Other materials for this product
View Buttweld Fittings in another material grade family.
Scroll →
Material
Duplex Steel
UNS S31803 · UNS S32205
View
Material
Cupro Nickel
Cu-Ni 90/10 (C70600) · Cu-Ni 70/30 (C71500)
View
Material
Nickel Alloy
Nickel 200 · Nickel 201
View
Material
Monel
Monel 400 · Monel K500
View
Material
Hastelloy
Hastelloy C-276 · Hastelloy C-22
View
Material
Aluminium
3003-H18 · 3003-H112
View
Material
Titanium
Grade 1 · Grade 2
View
Material
Stainless Steel
SMO 254 · F304
View
Material
Alloy Steel
F5 · F9
View
Material
Carbon Steel
ASTM A234 WPB · P235TR2
View
Material
Copper
C11000 (ETP) · C12200 (DHP)
View
Material
Copper Alloy
UNS C70600 (Cu-Ni 90/10) · UNS C71500 (Cu-Ni 70/30)
ViewCompliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
7ASME B16.9
ASMEFactory-made wrought buttwelding fittings.
- Scope
- Dimensions, tolerances, ratings, and markings for wrought buttweld fittings.
- Applies To
- Elbows, tees, reducers, caps, crosses, stub ends and related forms
- Size Coverage
- Typically NPS ½ through 48
- Related
- MSS SP-43, ASME B16.28
MSS SP-43
MSSWrought and fabricated butt-welding fittings for low pressure, corrosion resistant applications.
- Scope
- Dimensions for stainless and alloy butt-weld fittings intended for low-pressure service.
- Applies To
- Buttweld fittings in corrosion-resistant alloys
- Related
- ASME B16.9
MSS SP-75
MSSHigh-strength, wrought, butt-welding fittings.
- Scope
- Requirements for high-yield-strength wrought butt-welding fittings for pipelines and related services.
- Applies To
- Elbows, tees, reducers and caps in high-strength carbon/alloy steels
MSS SP-97
MSSIntegrally reinforced forged branch outlet fittings.
- Scope
- Design and dimensions for forged branch outlets (olets) that reinforce the branch connection.
- Applies To
- Weldolets, sockolets, threadolets, latrolets, elbolet and related outlets
MSS SP-95
MSSSwage(d) nipples and bull plugs.
- Scope
- Dimensions and marking for swage nipples and bull plugs.
- Applies To
- Concentric and eccentric swage nipples, bull plugs
ASTM A350
ASTMCarbon and low-alloy steel forgings requiring notch toughness testing for low-temperature service.
- Scope
- Forgings for low-temperature pressure service with Charpy impact requirements.
- Applies To
- Flanges, fittings and valves for LT service
- Typical Grades
- LF2 Class 1
ASME SA350
ASMEASME equivalent covering low-temperature carbon steel forgings.
- Scope
- Code adoption of ASTM A350 for LTCS forged piping components.
- Related
- ASTM A350
Certificates
5EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
NACE MR0175
Materials for use in H₂S-containing environments in oil and gas production.
- Type
- Service / sour-service requirement
- Scope
- Limits hardness, microstructure and material selection for sulfide stress cracking resistance.
- Applies To
- Carbon, alloy and CRA piping products ordered for sour service
- Benefit
- Supports upstream oil & gas projects specifying sour-service compliance.
Manufacturing
Crafted with care
Workshop and production views for Low Temperature Carbon Steel Reducing Tee — the same craftsmanship photos from our plant archives, shown in webp.
2 photos
People also ask
Questions about Buttweld Fittings
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Buttweld Fittings?+
Yes. Nascent Fittings Inc. manufactures and supplies Buttweld Fittings for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Buttweld Fittings worldwide?+
Yes. We export Buttweld Fittings globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Buttweld Fittings?+
Buttweld Fittings is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Low Temperature Carbon Steel Reducing Tee?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
