Nascent Fittings Inc.·Titanium
Titanium CHECK VALVE
Instrumentation & process tube fittings in SS and alloys. Compression elbows, tees & unions with MTCs and worldwide project supply.
- Material
- Titanium
- Size
- Common tube OD ranges
- Standard
- ASME B31.3
- Corrosion
- Exceptional
About
Titanium Tube Fittings
Product overview combined with Titanium material context for project selection.
Tube fittings for instrumentation, hydraulic and process tubing connections. Nascent supplies compression, bite-type and related tube fittings in stainless steel and compatible alloys for leak-tight joints under vibration and pressure cycling.
Available in elbows, tees, unions, connectors and adapters sized to common tube OD standards, with material certificates for oil & gas, chemical and utility systems.
Manufacturing note
Check valves are usually installed in the tube line to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to protect the piping, other valves, pumps etc. Check valves are used in many different applications. They are often placed on the outlet side of a pump, to protect the pump from backflow. The check valves are installed here to make sure that the coolant is not flushing back down. If the flow turns and no check valve is installed, a water hammer can occur. Water hammer often occurs with an extreme force and will easily damage a pipeline or components. In order to make sure the check valve protects the system properly, each system has to be assessed individually, and factors such as the risk of water hammer, acceptable pressure loss, and the financial consequence of installing a check valve with a too high safety margin against water hammer have to be considered. Check valves are extensively used in the oil and gas production industries and are specifically designed for flow control in the most demanding and hazardous service conditions. A check valve controls the flow direction of fluids and are available in various configurations depending on the application.
Typical applications
- Aerospace
- Marine
- Offshore Platforms
- Chemical Processing
- Petrochemical
- Power Generation
Configurations
Titanium Tube Fittings types
Open a type for drawings-aligned specifications.
Titanium AIR HEADER MANIFOLDS
Titanium BALL VALVE
Titanium BRANCH TEE
Titanium BULK HEAD UNION
Titanium CHECK VALVE
Titanium CONDENSATE POT
Titanium FEMALE CONNECTOR
Titanium FEMALE TEE
Titanium HOSE CONNECTIONS
Titanium MALE CONNECTOR
Titanium MANIFOLDS VALVE
Titanium NEEDLE VALVE
Titanium OD CAP
Titanium OD PLUG
Titanium REDUCING UNION
Titanium RUN TEE
Titanium grades
Available grades for Tube Fittings
Drawn from the Titanium catalog and this product’s material specification.
Grade 1
UNS R50250
Commercially pure titanium with excellent corrosion resistance and formability.
Best for · Maximum corrosion resistance
Grade 2
UNS R50400
Most widely used commercially pure titanium grade.
Best for · General industrial applications
Grade 4
UNS R50700
Strongest commercially pure titanium grade.
Best for · High strength corrosion-resistant applications
Grade 5 (Ti-6Al-4V)
UNS R56400
Most popular titanium alloy with exceptional strength and corrosion resistance.
Best for · High performance applications
Grade 6
UNS R54520
Titanium alloy with improved strength and elevated temperature resistance.
Best for · High temperature service
Grade 7
UNS R52400
Palladium-enhanced titanium with exceptional corrosion resistance.
Best for · Highly corrosive environments
Grade 9
UNS R56320
Titanium alloy combining strength and formability.
Best for · Lightweight structural applications
Grade 19
UNS R58640
High-strength titanium alloy for demanding industrial environments.
Best for · High strength service
Grade 23 (Ti-6Al-4V ELI)
UNS R56401
Extra low interstitial titanium alloy with superior fracture toughness.
Best for · Medical and aerospace applications
Grade 12
UNS R53400
Titanium alloy with Mo and Ni additions for crevice corrosion resistance in hot brine.
Best for · Hot brine and chemical crevice resistance
Also available in
Other materials for this product
View Tube Fittings in another material grade family.
Scroll →
Material
Aluminium
Tube Fittings
View
Material
Stainless Steel
Tube Fittings
View
Material
Alloy Steel
Tube Fittings
View
Material
Duplex Steel
Tube Fittings
View
Material
Carbon Steel
Tube Fittings
View
Material
Monel
Tube Fittings
View
Material
Hastelloy
Tube Fittings
View
Material
Copper
Tube Fittings
View
Material
Low Temperature Carbon Steel
Tube Fittings
View
Material
Nickel Alloy
Tube Fittings
View
Material
Copper Alloy
Tube Fittings
View
Material
Cupro Nickel
Tube Fittings
ViewCompliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
2ASME B31.3
ASMEProcess piping design code.
- Scope
- Design, materials, fabrication, assembly, erection, examination, inspection and testing of process piping.
- Applies To
- Petroleum, chemical, pharmaceutical, textile, paper, semiconductor and related process plants
ASTM B381
ASTMTitanium and titanium alloy forgings.
- Scope
- Forged titanium components for industrial and corrosion-resistant service.
- Applies To
- Titanium flanges, fittings and forged parts
Certificates
5EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
NACE MR0175
Materials for use in H₂S-containing environments in oil and gas production.
- Type
- Service / sour-service requirement
- Scope
- Limits hardness, microstructure and material selection for sulfide stress cracking resistance.
- Applies To
- Carbon, alloy and CRA piping products ordered for sour service
- Benefit
- Supports upstream oil & gas projects specifying sour-service compliance.
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
People also ask
Questions about Tube Fittings
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Tube Fittings?+
Yes. Nascent Fittings Inc. manufactures and supplies Tube Fittings for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Tube Fittings worldwide?+
Yes. We export Tube Fittings globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Tube Fittings?+
Tube Fittings is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Titanium CHECK VALVE?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
