Nascent Fittings Inc.·Aluminium
Aluminium Laterals
ASME B16.9 welded elbows, tees, reducers & caps in SS, CS, alloy & duplex. Project sizes with MTCs and global industrial export.
- Material
- Aluminium
- Size
- 1/2" NB to 48" NB
- Schedule
- Sch 5s through XXS / custom
- Standard
- ASME B16.9
About
Aluminium Welded Fittings
Product overview combined with Aluminium material context for project selection.
Welded pipe fittings for fabricated and ERW line systems where welded construction meets project cost and delivery needs. Nascent supplies elbows, tees, reducers, caps and related shapes in carbon, stainless, alloy and duplex steels to ASME B16.9 / MSS dimensions.
Welded fittings are produced with controlled weld quality, NDE options as specified, and full material traceability for oil & gas, power, water and process industry piping.
Manufacturing note
Nascent fittings manufacturers and exporters of high-quality lateral to our reliable buyers in a variety of specifications which include standard, dimensions, types, and sizes making our outcomes available to both customized and non – customized standards. A lateral pipe tee means a pipe fitting which is similar to a tee but has a side opening outlet branch at a 45-degree angle. It is a kind of steel pipe tee, but the branch direction is different with the straight tee.
Typical applications
- Aerospace
- Marine
- Shipbuilding
- Automotive
- Power Generation
- Chemical Processing
Configurations
Aluminium Welded Fittings types
Open a type for drawings-aligned specifications.
Aluminium grades
Available grades for Welded Fittings
Drawn from the Aluminium catalog and this product’s material specification.
2024
UNS A92024
High-strength aerospace aluminium alloy.
Best for · Aerospace applications
6061
UNS A96061
Versatile heat-treatable aluminium alloy with excellent corrosion resistance.
Best for · General engineering applications
6063
UNS A96063
Architectural grade aluminium with excellent finish quality.
Best for · Architectural and decorative applications
6101
UNS A96101
Aluminium alloy developed for electrical conductivity.
Best for · Electrical applications
7075
UNS A97075
One of the highest-strength aluminium alloys available.
Best for · High-strength applications
3003-H18
UNS A93003
Al-Mn alloy in hard temper (H18) with good corrosion resistance and moderate strength.
Best for · Formed sheet and tube applications
3003-H112
UNS A93003
Al-Mn alloy in H112 temper for wrought products with good corrosion resistance.
Best for · General wrought aluminium parts
6351-T5
UNS A96351
Al-Mg-Si extrusion alloy in T5 temper with good strength and corrosion resistance.
Best for · Structural extrusions
6351-T6
UNS A96351
Solution heat-treated and artificially aged 6351 with higher strength.
Best for · Higher-strength extrusions
Also available in
Other materials for this product
View Welded Fittings in another material grade family.
Scroll →
Material
Stainless Steel
Welded Fittings
View
Material
Alloy Steel
Welded Fittings
View
Material
Duplex Steel
Welded Fittings
View
Material
Titanium
Welded Fittings
View
Material
Carbon Steel
Welded Fittings
View
Material
Monel
Welded Fittings
View
Material
Hastelloy
Welded Fittings
View
Material
Copper
Welded Fittings
View
Material
Low Temperature Carbon Steel
Welded Fittings
View
Material
Nickel Alloy
Welded Fittings
View
Material
Copper Alloy
Welded Fittings
View
Material
Cupro Nickel
Welded Fittings
ViewCompliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
5ASME B16.9
ASMEFactory-made wrought buttwelding fittings.
- Scope
- Dimensions, tolerances, ratings, and markings for wrought buttweld fittings.
- Applies To
- Elbows, tees, reducers, caps, crosses, stub ends and related forms
- Size Coverage
- Typically NPS ½ through 48
- Related
- MSS SP-43, ASME B16.28
ASME B16.28
ASMEWrought steel buttwelding short radius elbows and returns.
- Scope
- Dimensions and marking for short-radius elbows and 180° returns.
- Applies To
- Short radius elbows and return bends
- Related
- ASME B16.9
MSS SP-43
MSSWrought and fabricated butt-welding fittings for low pressure, corrosion resistant applications.
- Scope
- Dimensions for stainless and alloy butt-weld fittings intended for low-pressure service.
- Applies To
- Buttweld fittings in corrosion-resistant alloys
- Related
- ASME B16.9
ASTM B247
ASTMAluminum and aluminum-alloy die forgings, hand forgings, and rolled ring forgings.
- Scope
- Chemical and mechanical requirements for aluminium alloy forgings.
- Applies To
- Aluminium forged flanges, fittings and machined components
ASTM B361
ASTMFactory-made wrought aluminum and aluminum-alloy welding fittings.
- Scope
- Wrought aluminium fittings for welding assembly.
- Applies To
- Aluminium buttweld elbows, tees, reducers and caps
Certificates
4EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
People also ask
Questions about Welded Fittings
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Welded Fittings?+
Yes. Nascent Fittings Inc. manufactures and supplies Welded Fittings for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Welded Fittings worldwide?+
Yes. We export Welded Fittings globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Welded Fittings?+
Welded Fittings is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Aluminium Laterals?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
