Nascent Fittings Inc.·Copper Alloy
Copper Alloy COIL FORM TUBE
Heat exchanger & process tubes in SS, CS, copper alloy & nickel. Seamless/welded, ASTM grades with MTCs and global export packing.
- Material
- Copper Alloy
- Size
- Instrument to heat-exchanger OD
- Standard
- ASTM
- Corrosion
- Excellent
About
Copper Alloy Tubes
Product overview combined with Copper Alloy material context for project selection.
Precision tubes for heat exchangers, instrumentation and process lines. Nascent supplies seamless and welded tubes in stainless, alloy, copper alloys, duplex and nickel grades with controlled OD, wall and finish for critical service.
Tubes are offered to ASTM / ASME / EN dimensional and material requirements, with MTC support for boilers, condensers, coolers and sanitary or high-purity applications as specified.
Manufacturing note
Coil form tubes are used in high heat applications such as heat exchangers, condensers and in superheaters. The pipes are of smaller dimensions and are used in coils. Coil straighteners are used to install the coils in place. Coil-shaped tube Heat Exchanger tubes are designed specifically for use in heat exchangers. Coiling the tubes lengthens the material flow length within a given space. Nascent fittings are one of the leading Stainless Steel Coil Tubing Manufacturers and we produce these coils in different material grades. Coil tube is the most cost-effective way for many applications because the raw material is cheaper and widely available than the other material grades. Coil tubes are of high quality and have less absolute roughness, so that they could be used with accuracy. The Coiled tube is used along with other types of pipes. Coiled tube is seamless due to the smaller diameters and fluid flow requirements. The Coil form Tube is placed under warm water, hot air, or inside a heating chamber to accelerate the heating of the fluids inside the coil. The coil tubing must have precise dimensions, be resistant to corrosion, and be able to withstand high temperatures.
Typical applications
- Marine
- Shipbuilding
- Offshore Platforms
- Heat Exchangers
- Condensers
- Power Generation
Configurations
Copper Alloy Tubes types
Open a type for drawings-aligned specifications.
Copper Alloy grades
Available grades for Tubes
Drawn from the Copper Alloy catalog and this product’s material specification.
UNS C70600 (Cu-Ni 90/10)
UNS C70600
Copper Nickel 90/10 alloy with excellent seawater corrosion resistance, biofouling resistance, and long service life.
Best for · General marine and seawater service
UNS C71500 (Cu-Ni 70/30)
UNS C71500
Copper Nickel 70/30 alloy with higher nickel content providing enhanced corrosion resistance and superior strength in aggressive seawater environments.
Best for · High-velocity seawater and offshore service
UNS C71640
UNS C71640
Enhanced Copper Nickel alloy developed for demanding marine and offshore applications requiring superior corrosion resistance and mechanical strength.
Best for · Critical offshore and seawater applications
Also available in
Other materials for this product
View Tubes in another material grade family.
Scroll →
Material
Aluminium
Tubes
View
Material
Stainless Steel
Tubes
View
Material
Alloy Steel
Tubes
View
Material
Duplex Steel
Tubes
View
Material
Titanium
Tubes
View
Material
Carbon Steel
Tubes
View
Material
Monel
Tubes
View
Material
Hastelloy
Tubes
View
Material
Copper
Tubes
View
Material
Low Temperature Carbon Steel
Tubes
View
Material
Nickel Alloy
Tubes
View
Material
Cupro Nickel
Tubes
ViewCompliance
Standards & certificates
Specifications and documentation typically referenced for this product line — details from our shared compliance catalog.
Standards
7ASTM
ASTMASTM International material and product specifications.
- Scope
- Umbrella reference for ASTM material grades used across the catalog.
- Applies To
- Carbon, alloy, stainless, duplex and nickel-alloy piping products
ASME
ASMEAmerican Society of Mechanical Engineers — boiler, pressure vessel and piping codes.
- Scope
- Umbrella reference for ASME dimensional and material standards used on this product line.
- Applies To
- Flanges, fittings, pipes and related pressure components
EN
CENEuropean Norms for materials, flanges and fittings.
- Scope
- Umbrella reference for EN material and flange standards.
- Applies To
- EU-specified piping materials and PN flanges
ASTM / ASME SB61
ASTM / ASMESteam or valve bronze castings.
- Scope
- Composition and property requirements for bronze castings used under pressure.
- Applies To
- Valves, fittings and flanges in marine and industrial service
ASTM / ASME SB62
ASTM / ASMEComposition bronze or ounce metal castings.
- Scope
- Cast bronze for pressure-containing valves and fittings.
- Applies To
- Valves, fittings and flanges
ASTM B151
ASTMCopper-nickel-zinc alloy (nickel silver) and copper-nickel rod and bar.
- Scope
- Rod and bar products in copper-nickel alloys.
- Applies To
- Machined fittings, fasteners and bar stock components
ASTM B152
ASTMCopper sheet, strip, plate, and rolled bar.
- Scope
- Copper flat products for fabrication and cladding.
- Applies To
- Sheet/plate feed stock for fabricated copper components
Certificates
4EN 10204 3.1
Mill test certificate with inspection by the manufacturer’s authorized inspection representative, independent of manufacturing.
- Type
- Inspection document (MTC)
- Scope
- States chemical analysis, mechanical test results and heat / lot identification for the supplied material.
- Documentation
- EN 10204 Type 3.1
- Benefit
- Provides traceable material evidence required on most industrial RFQs.
ISO 9001
Quality Management System certification.
- Type
- Quality Management System
- Scope
- Demonstrates a documented QMS covering process control, traceability and continual improvement across manufacturing and supply.
- Benefit
- Assures buyers of consistent product quality and controlled production practices.
- Issued As
- Third-party accredited certificate
PED
Pressure Equipment Directive compliance for equipment placed on the EU market.
- Type
- Regulatory conformity
- Scope
- Design and conformity assessment requirements for pressure equipment and assemblies in the European Union.
- Benefit
- Enables supply of pressure-rated components into EU projects when PED conformity is required.
- Related
- CE marking / Notified Body routes as applicable
IBR
Indian Boiler Regulations approval for boiler-quality piping materials and components.
- Type
- Regulatory approval
- Scope
- Materials and components intended for use under Indian boiler installations.
- Benefit
- Required for many power and process projects under IBR jurisdiction in India.
People also ask
Questions about Tubes
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Tubes?+
Yes. Nascent Fittings Inc. manufactures and supplies Tubes for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Tubes worldwide?+
Yes. We export Tubes globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Tubes?+
Tubes is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Copper Alloy COIL FORM TUBE?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
